5-7
User Guide for the Cisco Network Analysis Module (NAM) Traffic Analyzer, 5.0
OL-22617-01
Chapter 5 User and System Administration
System Administration
Step 6 Do one of the following:
• To save the changes click Submit.
• To leave the configuration unchanged, choose Reset.

Configuring the NAM System Time with an NTP Server

To configure the NAM system time with an NTP server:
Step 1 On the NAM appliance GUI, choose Administration > System > System Time.
Step 2 Choose the NTP Server radio button.
Step 3 Enter one or two NTP server names or IP address in the NTP server name/IP Address text boxes.
Step 4 Select the Region and local time zone from the lists.
Step 5 Do one of the following:
• To save the changes, click Submit.
• To leave the configuration unchanged, click Reset.
E-Mail Setting
You can configure the NAM to provide e-mail notification of alarms and to e-mail reports. The following
procedure describes how to configure the NAM for e-mail notifications.
Step 1 Choose Administration > System > E-Mail Setting.
Step 2 The Mail Configuration Window displays. Table 5-4 describes the Mail Configuration Options.
Step 3 Check the Enable Mail check box.
Step 4 Enter the distinguished name of the External Mail Server.
Step 5 Put an e-mail address in the Send Test Mail to field (optional). A test e-mail will be sent to this recipient.
Step 6 Put an e-mail address in the Mail Alarm to field. Alarm notifications and Exports will be sent to this
recipient.
Tab l e 5-4 Mail Configuration Options
Field Description
Enable Mail Enables e-mail of reports and notification of alarms
External Mail Server Distinguished name of external mail server
Send Test Mail List e-mail addresses for up to three e-mail recipients
Mail Alarm to This recipient will receive alarm notifications and scheduled exports.