Cisco Systems NAM, 5 manual Managed Device, Custom Export, Device Information

Chapter 2 Setting Up The NAM Traffic Analyzer

Managed Device

Custom Export

You can enable Custom Export to send response time data to an external reporting console such as NetQoS SuperAgent.

After you enable Custom Export, you may also want to enable the “Export Passthrough Response Time” option when creating a WAAS Data Source (Setup > NAM Data Sources > Auto Create).

To enable the NAM to export response time data to an external console:

Step 1 From the NAM GUI, choose Setup > Data Export > Custom Export.

The Response Time Export window displays.

Step 2 Check the Enable Export check box.

Step 3 Enter the IP address of the external reporting console in the IP Address field.

Step 4 Enter the UDP port number of the external console (blank is default).

Step 5 Optionally, click Export Non-WAASTraffic.

This enables the export of SPAN and other data as well as WAAS traffic.

Step 6 Click Submit to enable traffic export, or click Reset to clear the changes from the screen.

Managed Device

A managed device is the device on which SPAN is configured, and where system health ifTable statistics are polled via SNMP.

The NAM 5.0 Traffic Analyzer menu selections for setting up Managed Devices are:

•Device Information, page 2-55

•NBAR Protocol Discovery, page 2-57

Device Information

To view the switch information, choose Setup > Managed Device > Device Information. The fields are described in Table 2-24, Switch Information.

	Table 2-24	Switch Information
	Field			Description
	SNMP Test information			Displays the IP address of the NAM and the switch that the SNMP test
				occurred on.
	Name			Name of the switch.
	Hardware			Hardware description of the switch.
	Supervisor Software Version			Current software version of the Supervisor.
	System Uptime			Total time the switch has been running.
	Location			Physical location of the switch.
			User Guide for the Cisco Network Analysis Module (NAM) Traffic Analyzer, 5.0
OL-22617-01					2-55