Cisco Systems 5, NAM See -7for an example, Unique text string for naming a site, Subnet Detection

Chapter 2 Setting Up The NAM Traffic Analyzer

Network

See Figure 2-7for an example.

Figure 2-7 Site Configuration Screen

		The fields are defined below in Table 2-28,Site Configuration Screen Fields.
Table 2-28	Site Configuration Screen Fields
Field		Description
Name		Unique text string for naming a site.
Description		Optional text string for describing site.
Disable Site		If you check this check box, the NAM will skip this site when classifying traffic. This is useful if the
(check box)		site is no longer active, but the user would still like to access historical site data in the database.
		Otherwise, the user should delete sites that are not needed.
Subnet		IP address subnet (IPv4/IPv6 address and mask); for example, 10.1.1.0/24. Click the blue “i” to get
		information about Site Rules.
		You can click the Detect button to tell the NAM to look for subnets in the traffic. See the next section,
		Subnet Detection.
Data Source		Specify the data source where the site traffic is coming from.
		Leave this field blank if the site traffic can come from multiple data sources.
VLAN		Specify the VLAN where the site traffic is coming from.
		Note	The VLAN selection is not enabled for NDE and WAAS data sources.
		Leave this field blank if the site traffic can come from multiple VLANs.

	User Guide for the Cisco Network Analysis Module (NAM) Traffic Analyzer, 5.0
2-62	OL-22617-01