Cisco Systems 5 manual Editing an Alarm Threshold, Deleting a NAM Threshold

Chapter 2 Setting Up The NAM Traffic Analyzer

Alarms

Table 2-22	NDE Interface Alarm Thresholds (continued)
Field		Description
Direction		Choose Ingress or Egress.
Severity		Choose High or Low. These will display on the Alarm Summary dashboard
		(Monitor > Overview >Alarm Summary), where you can choose to view
		High, Low, or High and Low alarms.
Actions		Choose a Rising action and a Falling action from the lists (optional). See
		Alarm Actions, page 2-36for information on setting up alarm actions.
NDE Interface Metrics		Choose Bytes or Packets, and enter a Rising and Falling threshold.
(per second)
Add Metrics (button)		Click the Add Metrics button to add another row.
Delete (button)		Click the Delete button to remove that Metrics row.

Note If you leave a selection blank, it means that that parameter will not be considered. If you select “Any”, it will use any of the selections for that parameter, if encountered.

Step 3 Click Submit to set the thresholds, click Reset to reset the thresholds to their default value, or click Cancel to remove any changes you might have made.

Editing an Alarm Threshold

To edit an alarm threshold:

Step 1 Choose Setup > Alarms > Thresholds.

The Thresholds table displays.

Step 2 Select the alarm to edit, then click Edit.

The dialog box displays for the type of alarm; for example, “Host Threshold.”

Step 3 Make the necessary changes.

Step 4 Click Submit to save your changes, click Reset to reset the thresholds to the values set before you edited them, or click Cancel to cancel the edit and return to the previous page.

Deleting a NAM Threshold

To delete a NAM alarm threshold, simply select it from the Alarms table, then click Delete.

Click OK to confirm deletion, or click Cancel to leave the configuration unchanged.

	User Guide for the Cisco Network Analysis Module (NAM) Traffic Analyzer, 5.0
2-48	OL-22617-01