Cisco Systems NAM, 5 manual Configuring NetFlow Data Export, Description of the NetFlow Export

Chapter 2 Setting Up The NAM Traffic Analyzer

Data Export

Figure 2-6 NetFlow Exports Screen

Already defined NetFlow Exports will be listed on the screen. If you hover over the “quick view” arrow icon next to the Record Type, as shown in Figure 2-4, a detailed view of the filter details of the selected NetFlow export will display.

The fields are described in Table 2-23.

Configuring NetFlow Data Export

To configure NetFlow Data Export, perform the following steps:

Step 1 Choose Setup > Data Export > NetFlow.

Step 2 Click the Create button.

Step 3 At the NetFlow Export Configuration screen, fill in the fields. See Table 2-23, NetFlow Exports Fields for field descriptions.

Table 2-23 NetFlow Exports Fields

Field	Description
Description	A description of the NetFlow Export.
Destination IP	The IP address of the device to be exported to. Only IPv4 addresses are supported.
Address
Destination Port	The port number of the device to be exported to.
	Valid characters: 1-9. Length: Min 1, Max 65535.

	User Guide for the Cisco Network Analysis Module (NAM) Traffic Analyzer, 5.0
OL-22617-01		2-51