Chapter 2 Setting Up The NAM Traffic Analyzer

Monitoring

Disabling a URL Collection

To disable a URL collection:

Step 1 Choose Setup > Monitoring > URL Collection.

Step 2 Uncheck the Enable check box.

Step 3 Click Submit.

WAAS Monitored Servers

WAAS monitored servers specify the servers from which WAAS devices export traffic flow data to the NAM monitors. To enable WAAS monitoring, you must list the servers to be monitored by the NAM using the WAAS device's flow monitoring.

Note The NAM is unable to monitor WAAS traffic until you set up WAAS monitored servers. The NAM displays status of WAAS devices as pending until you set up WAAS monitored servers.

This section contains the following topics:

Adding a WAAS Monitored Server, page 2-81

Deleting a WAAS Monitored Server, page 2-81

Adding a WAAS Monitored Server

To add a WAAS monitored server:

Step 1 Choose Setup > Monitoring > WAAS Servers. The WAAS Servers page displays. Figure 2-11shows an example of the WAAS Monitored Servers table.

Figure 2-11 WAAS Monitored Servers Table

Step 2 Check the “Filter Response Time for all Data Sources by Monitored Servers” check box if you want the NAM to compute response time data only for the servers from this list for all data sources, including non-WAAS data sources. All other servers will be ignored in response time monitoring views. This enables you to reduce NAM workload and to improve NAM overall performance.

Step 3 Click Add.

 

 

User Guide for the Cisco Network Analysis Module (NAM) Traffic Analyzer, 5.0

 

 

 

 

 

 

OL-22617-01

 

 

2-81

 

 

 

 

 

Page 115
Image 115
Cisco Systems NAM, 5 manual Waas Monitored Servers, Disabling a URL Collection, Adding a Waas Monitored Server