2-47
User Guide for the Cisco Network Analysis Module (NAM) Traffic Analyzer, 5.0
OL-22617-01
Chapter 2 Setting Up The NAM Traffic Analyzer
Alarms
Step 2 Click the Create button and choose Voice Signaling tab.
Step 3 The Voice Signaling Alarm Threshold Configuration window displays. Fill in the fields as appropriate.
Table 2-21, Voice Signaling Thresholds describes the fields available under the Voice Signaling Metrics
drop-down menu.
Note If you leave a selection blank, it means that that parameter will not be considered. If you select
“Any”, it will use any of the selections for that parameter, if encountered.
Step 4 Click Submit to set the voice signaling thresholds, click Reset to reset the thresholds to their default
value, or click Cancel to remove any changes you might have made.
Step 5 When finished, click Submit.
Setting NDE Interface Thresholds
Step 1 Choose Setup > Alarms > Thresholds.
Step 2 Click the Create button and choose the NDE Interface tab.
The NDE Interface Alarm Threshold Configuration screen displays. The fields are described in
Table 2-22, NDE Interface Alarm Thresholds.
Tab l e 2-21 Voice Signaling Thresholds
Field Description
Name Give the Voice Signaling Alarm Threshold a name.
Severity Choose High or Low. These will display on the Alarm Summary
dashboard (Monitor > Overview >Alarm Summary), where you can
choose to view High, Low, or High and Low alarms.
Actions Choose a Rising action and a Falling action from the lists (optional).
See Alarm Actions, page 2-36 for information on setting up alarm
actions.
Voice Signaling Metrics Choose Jitter to enable an alarm when the NAM detects jitter to be
more than the value set here.
Check Packet Loss % to enable an alarm when the NAM detects
Packet Loss percentage to be outside of the values you entered.
Add Metrics (button) Click the Add Metrics button to add another row.
Delete (button) Click the Delete button to remove that Metrics row.
Tab l e 2-22 NDE Interface Alarm Thresholds
Field Description
Name Give the NDE Interface Alarm Threshold a name.
Data Source Choose a data source from the list.
Interface Choose an interface from the list.