Cisco Systems NAM, 5 manual Scheduled Exports, Editing NetFlow Data Export, Click

Chapter 2 Setting Up The NAM Traffic Analyzer

Data Export

Step 4 Click the Submit button to save the configuration, or click the Reset button to clear the fields, or click the Cancel button to exit the screen without configuration.

Editing NetFlow Data Export

Step 1 Choose Setup > Data Export > NetFlow.

Step 2 Highlight the export you want to edit and click the Edit button.

Step 3 Make the desired changes.

Step 4 Click:

•The Submit button to submit the edits

•The Reset button to clear the changes you made

•The Cancel button to close the dialog box and return to the previous screen.

Scheduled Exports

You can set up scheduled jobs that will generate a daily report at a specified time, in the specified interval, and then e-mail it to a specified e-mail address. You can also obtain a report on the spot clicking on the Preview button, rather than wait for the scheduled time. This report can also be sent after you preview it.

At the Setup > Data Exports > Scheduled Export screen, you will only be able to edit or delete an already-configured scheduled export. The creation of can only be done from a “Monitor” or “Analyze” screen.

To set up a Scheduled Export:

Step 1 When you are on most screens under the “Monitor” or “Analyze” menus, the Interactive Report is available on the left side of the screen. Click the Export button in the Interactive Report box.

Step 2 Choose the Export Type (Daily or Weekly).

Step 3 Choose the Export Time (when you would like the report delivered to you): Day and Hour.

Step 4 Choose the Report Time (if Daily) or the Data Time Range (if Weekly). This is the interval of time you would like measured.

•The Report Time for a daily report is restricted to the current 24 hours.

•The Report Time for a weekly report is always from 17:00 to 17:00, for however many days chosen. For example:

•If you choose Export Type “Weekly,” Data Time Range “Last 2 Days,” and Export Time: Day “Wednesday” and Hour “13:00,” the report will show data from Sunday at 17:00 to Tuesday at 17:00.

•If you choose Export Time: Day “Wednesday” and Hour “18:00,” the report will show data from Monday at 17:00 to Wednesday at 17:00.

Step 5 Enter the e-mail address to which you would like the report delivered.

	User Guide for the Cisco Network Analysis Module (NAM) Traffic Analyzer, 5.0
OL-22617-01		2-53