Chapter 1 Overview

Overview of the NAM Platforms

SNMP v3 Support -- NAM to Router/Switch Support

Simple Network Management Protocol Version 3 (SNMPv3) is an interoperable standards-based protocol for network management. The security features provided in SNMPv3 are:

Message integrity—Ensuring that a packet has not been tampered with in-transit.

Authentication—Determining the message is from a valid source.

Encryption—Scrambling the contents of a packet prevent it from being seen by an unauthorized source.

With NAM 5.0, you have the ability to manage devices with SNMPv3.

Note For the WS-SVC-NAM-1 and WS-SVC-NAM-2 platforms, SNMPv3 is not required. SNMP requests and responses are communicated over an internal interface within the chassis, and SNMPv3 is not used.

Overview of the NAM Platforms

The following models differ in memory, performance, disk size, and other capabilities. Therefore, some allow for more features and capabilities (for example, the amount of memory allocated for capture).

Throughout this User Guide, there will be Notes explaining that some features apply only to specific platforms. If there is no Note, then that feature or aspect applies to all NAM platforms.

NAM 5.0 software supports the following NAM models (SKU):

Cisco NAM 2204 Appliances

NAM2204-RJ45

NAM2204-SFP

Cisco NAM 2220 Appliance

NAM2220

Cisco 6500 Series Switches and Cisco 7600 Series Routers

WS-SVC-NAM-1

WS-SVC-NAM-1-250S

WS-SVC-NAM-2

WS-SVC-NAM-2-250S

Cisco Branch Routers

NME-NAM-80S

NME-NAM-120S

NAM 5.0 virtual blade software also supports the following virtual blade:

Cisco WAAS NAM Virtual Service Blade

Note The Cisco Nexus 1010 Virtual Services Appliance is not supported with NAM Traffic Analyzer Release 5.0. The suggested upgrade path for Nexus 1010 NAM 4.2 users is from NAM 4.2 to 4.2.1N, and then to NAM 5.1 (when available).

User Guide for the Cisco Network Analysis Module (NAM) Traffic Analyzer, 5.0

 

OL-22617-01

1-5

 

 

 

Page 19
Image 19
Cisco Systems manual Overview of the NAM Platforms, Snmp v3 Support -- NAM to Router/Switch Support, WS-SVC-NAM-1-250S