③ and ④ Video Input BNC Connectors (Vin 1, Vin 2, Vin 3 and Vin 4)
Used for video inputs. Video input type: NTSC or PAL
⑤ Termination Resistor DIP Switch (75Ω ON)
A switch to turn On/Off a 75Ω termination resistor is provided for each video input. Factory default
setting is ON.
⑥ Video Output BNC Connector
Vout is used to display quad or single channel composite output to an external monitor.
⑦ Reset Switch (Reset)
The Reset Switch is used for restarting the Camera Server or resetting the Camera Server to Factory
Default (FD). Refer to Factory Default Settings for detailed procedures.
2.5. Rear Panel
4
① Audio Input Jack (Ain 1,2 and Ain 3,4)
The Camera Server has mono audio input channels using stereo audio sockets. Therefore, a special
cable is needed to connect audio devices. See the Audio Input Connector diagram.
④⑥
⑤
③
① ②
⑧
⑦
⑨