How to record video NOW (Passive mode)
Step 1: Set the Record Enable as YES
Step 2: Set the Record Mode as Passive
Step 3: Enter the Port Number and Record Recycle
•Port number: Used for playback. 2100 is set as the default.
•Record Recycle: Rotate lets the new files overwrite existing files when USB memory is full.
None lets the recording stop if the USB memory is full.
Step 4: PostTime is set in seconds. If you want to record for 30 minutes, type 1800 for the value of PostTime. The recording will continue for 30 minutes on when the Record button is presses.
Step 5: Set the Skip Frame and Record Frame as described below:
•Skip Frame:
This is the number of frames to skip between Record Frame. Refer to the examples below.
•Record Frame
This is the number of recorded frames. For example, if the value is 0, only 1 frame is recorded after skipping the number of Skip Frame set above.
For example:
If “149” is set for Skip Frame, “0” for Record Frame, and “30” for FPS, you will get 1 frame every 5 seconds.
If “5” is set for Skip Frame and “1” for Record Frame, you will get the frames as below.
F# 0 1 2 3 4 5 6 7 8 9 10 11 12 13
Recording Frame
레
Skip Frame
Step 6: Click the Record button to start the recording.
38
