5.4.3. Event Settings
To register an Event, follow Steps 1-3 below.
Step 1
1. Click Add to create an Event.
Name
Enter a descriptive name for the event
Event Type
• Software – device boots, motion detection, video losses, etc.
• Hardware – Digital Input activation (such as sensor).
Hardware Mode
If the event type is a Hardware type, use the following convention: Nnnn = where n = {x, 1}
x = do not trigger
1 = trigger on activation
For example: “1xxx” means to trigger when first Digital Input is activated.
“1xx1” means to trigger when the first and fourth Digital Input are activated.
33