Home Automation 87A00-1 5.2.2. Audio Output Settings

5.2.2. Audio Output Settings

The Audio Output Configuration settings are required to talk to people at the location where the camera

is installed. Configure the values and click the Save button. This feature enables your PC to send

audio to the speakers on the Camera Server. In order to test and use this feature, the microphone

should be connected to the audio port of your PC. Likewise, the speakers should be connected to the

87A00-1 Camera Server.

Name

Type a nickname for the audio output.

Stream Type

Select an audio input format. Supported formats are: PCM, uLaw, and aLaw.

Sample Rate

Select sampling frequency. Supported frequencies are: 16 KHz. and 8 KHz.

Data bit

Select the number of data bits per sample. If the stream type is PCM, 8bit and 16bit is available. If the

stream type is aLaw or uLaw, only 8bit is available.

Gain

Gain ranges from 0 to 255. The default value is 128.

Contents

Main HOME AUTOMATION, INC. Model 87A00-1 Camera Server Installation and User Guide Page DISCLAIMER SAFETY PRECAUTIONS FCC NOTICE The Privacy act of 1974 (5 U.S.C. 552a) Table of Contents Page 1. Introduction 1.1. Model 87A00-1 Camera Server 1.1.1. About the Camera Server 1.1.2. Main Features 1.2. Package Contents 1.3. Factory Default Settings 2. Operation 2.4. Front Panel 2.5. Rear Panel Page Voltage Type Digital Input Connections Relay Type Digital Input Connections Digital Output Connections RS-232C Connection RS-485 Connection 3.1. Accessing the Web Interface User Login Page 3.2. ActiveX Installation 4. Main Page Configuration 4.1. Single View Page Page 5. Setup Configuration 5.1. Video Setup 5.1.1. Video Settings Page 5.1.2. OSD Settings OSD String Configuration OSD Time configuration 5.1.3. Advanced 5.2. Audio Setup 5.2.1. Audio Input Settings 5.2.2. Audio Output Settings 5.3. Network Setup 5.3.1. General Settings IP Address Configuration 5.3.2. QoS Settings 5.3.3. Multicast Settings 5.3.4. DDNS Settings 5.3.5. Advanced Settings 5.4. Event Setup Caution ! 5.4.1. Event Server Settings 5.4.1.1. SMTP Server Settings 5.4.1.2. FTP Server Settings 5.4.1.3. TCP Server Settings 5.4.2. Motion Detection Settings 5.4.3. Event Settings Step 1 Page Step 2 Step 3 Page 5.5. Record Setup 5.5.1. Recording on USB Flash Drive Caution ! Preparation before recording How to record video NOW (Passive mode) How to record on SCHEDULE (Schedule mode) 5.5.2. Recording on FTP server 5.5.3. Playback the recoded data on the USB device 5.6. System Setup 5.6.1. System Date 5.6.2. System Update 5.6.3. User Management 5.6.4. PTZ Protocol How to add PTZ protocol manually 5.6.5. System Information 87A00-1 Information Version Information 5.6.6. Reboot 5.7. IO Setup 5.7.1. Serial Port Setting 5.7.2. DI/DO Setting 5.7.3. PTZ 5.7.4. External Video out Setting 6. Resetting the Camera Server 6.1. Rebooting 6.2. Reset to Factory Default