Lexmark MX310DN, 35S5700, 35S3389, 270 Adjusting Sleep mode, Saving money and the environment 151

Saving money and the environment 151

Use

On

Off

3Press .

To

Reduce printer noise.

Notes:

•Print jobs process at a reduced speed.

•Printer engine motors do not start until a document is ready to print. There is a short delay before the first page is printed.

•The alarm control and cartridge alarm sounds are turned off.

•The printer ignores the Advance Start command.

Use factory default settings.

Note: This setting supports the performance specifications of the printer.

Adjusting Sleep mode

To save energy, decrease the number of minutes before the printer enters Sleep mode. Select from 1 to 120. The factory default setting is 30 minutes.

Note: The printer still accepts print jobs when in Sleep mode.

Using the Embedded Web Server

1Open a Web browser, and then type the printer IP address in the address field.

Notes:

•View the printer IP address in the TCP/IP section in the Network/Ports menu. The IP address appears as four sets of numbers separated by periods, such as 123.123.123.123.

•If you are using a proxy server, then temporarily disable it to load the Web page correctly.

2Navigate to:

Settings > General Settings > Timeouts

3In the Sleep Mode field, enter the number of minutes you want the printer to wait before it enters Sleep mode.

4Click Submit.

Using the printer control panel

1From the printer control panel, navigate to:

> Settings > > Settings > > General Settings > > Timeouts > > Sleep Mode >

2In the Sleep Mode field, select the number of minutes you want the printer to wait before it enters Sleep mode.

3Press .