Using the Push Button Configuration (PBC) method
1From the printer control panel, navigate to:
> Settings > >Network/Ports > > Network [x] > > Network [x] Setup > > Wireless > >
Wireless Connection Setup > > WiFi Protected Setup > > Start Push Button Method >
2Follow the instructions on the printer display.
Using the Personal Identification Number (PIN) method
1From the printer control panel, navigate to:
> Settings > >Network/Ports > > Network [x] > > Network [x] Setu p > > Wireless > >
Wireless Connection Setup > > WiFi Protected Setup > > Start PIN Method >
2Copy the eightdigit WPS PIN.
3Open a Web browser, and then type the IP address of your access point in the a ddress bar.
Notes:
The IP address appears as four sets of numbers separated by periods, such as 123.123.123.123.
If you are using a proxy server, then temporarily disable it to load the Web page correctly.
4Access the WPS settings. For more information, see the documentation that came with your access point.
5Enter the eightdigit PIN, and then save the setting.
Connecting the printer to a wireless network using the Embedded Web Server
Before you begin, make sure that:
Your printer is connected temporarily to an Ethernet netwo rk.
A wireless network adapter is installed in your printer and working properly. For more information, see the
instruction sheet that came with the wireless network adapte r.
1Open a Web browser, and then type the printer IP address in the address field.
Notes:
View the printer IP address on the printer control panel. The IP address appears as four sets of numbers
separated by periods, such as 123.123.123.123.
If you are using a proxy server, then temporarily disable it to load the Web page correctly.
2Click Settings > Network/Ports > Wireless.
3Modify the settings to match the settings of your a ccess point (wireless router).
Note: Make sure to enter the correct SSID, security m ethod, preshared key or passphrase, network mode, and
channel.
4Click Submit.
Additional printer setup 29