Standard USB port disabled [56]
From the printer control panel, select Continue to clear the message. For nontouchscreen printer models, press
to confirm.
Notes:
The printer discards any data received through the USB port.
Make sure the USB Buffer menu is not set to Disabled.
Supply needed to complete job
Do either of the following:
Install the missing supply to complete the job.
Cancel the current job.
Too many flash options installed [58]
1Turn off the printer.
2Unplug the power cord from the electrical outlet.
3Remove the extra flash memory.
4Connect the power cord to a properly grounded electrical outlet.
5Turn the printer back on.
Too many trays attached [58]
1Turn off the printer.
2Unplug the power cord from the electrical outlet.
3Remove the extra trays.
4Connect the power cord to a properly grounded electrical outlet.
5Turn the printer back on.
Unformatted flash detected [53]
Try one or more of the following:
From the printer control, select Continue to stop the defragmentation and continue printing. For nontouchscreen
printer models, press to confirm.
Format the flash memory.
Note: If the error message remains, then the flash memory may be defective and need to be replaced.
Troubleshooting 197