3From the printer control panel, navigate to:
> Copy > > Content Type > select the content type of the origi nal document
4Press the left or right arrow button to scroll to one of the following:
•Text—The content of the original document is mostly text or line art.
•Text/Photo—The original document is a mixture of text and graphics or photos.
•Photo—The original document is mostly a photo or an image.
•Graphics—The original document is mostly business‑type graphics, such as pie charts, bar charts, and
animations.
5Press the up or down arrow button until Content Source appears, and then press the left or right arrow button
to scroll to one of the following:
•Color Laser—The original document was printed using a color laser printer.
•Inkjet—The original document was printed using an inkjet printer.
•Magazine—The original document is from a magazine.
•Press—The original document is from an offset press.
•Black/White Laser—The original document was printed usin g a mono laser printer.
•Photo/Film—The original document is a photo from a film.
•Newspaper—The original document is from a newspaper.
•Other—The original document was printed using an alternate or unknown printer.
6Select the number of copies or enter a number on the keypad, and then press .
Note: If you want to copy another document, then place it on the scanner g lass, press the left or right arrow
button to scroll to Scan the Next Page, and then press .
7Press the left or right arrow button to scroll to Finish the Job, an d then press .
Collating copies
If you print multiple copies of a document, then you can choose to print each co py as a set (collated) or to print the
copies as groups of pages (not collated).
Collated Not collated
To select a Collate setting:
1Load an original document faceup, short edge first into the ADF tray or facedown on the scanner glass.
Notes:
•Do not load postcards, photos, small items, transparencies, photo paper , or thin media (such as magazine
clippings) into the ADF tray. Place these items on the scanner glass.
Copying 63