Lexmark MX310DN, 35S5700, 35S3389 Print Settings, Setup menu, Understanding the printer menus 139

Understanding the printer menus		139
	Use	To
	Negative Image	Create a negative image of the original document.
	Off	Note: Off is the factory default setting.
	On
	Shadow Detail	Adjust the amount of shadow detail visible on a scanned image.
	‑4 to 4	Note: 0 is the factory default setting.
	Adjust ADF Skew	Correct slight skew in the scanned image.
	Auto	Note: Auto is the factory default setting.
	Off
	On
	Scan edge to edge	Specify whether the original document is scanned edge-to-edge.
	Off	Note: Off is the factory default setting.
	On
	Sharpness	Adjust the amount of sharpness of a scanned image
	1–5	Note: 3 is the factory default setting.
Print Settings
Setup menu
	Use		To
	Printer Language		Set the default printer language.
	PCL Emulation		Notes:
	PS Emulation
			• PCL Emulation is the factory default printer language.
			• Setting a printer language as the default does not prevent a
			software program from sending print jobs that use another
			printer language.
	Print Area		Set the logical and physical printable area.
	Normal		Note: Normal is the factory default setting. When attempting to
	Whole Page		print data in the non‑printable area defined by the Normal
			setting, the printer clips the image at the boundary.
	Resource Save		Specify how the printer handles temporary downloads, such as
	On		fonts and macros stored in the RAM, when the printer receives a
	Off		job that requires more memory than is available.
			Notes:
			• Off is the factory default setting. This sets the printer to
			retain the downloads only until memory is needed.
			Downloads are deleted in order to process print jobs.
			• On retains the downloads during language changes and
			printer resets. If the printer runs out of memory, then
			Memory Full [38] appears, and downloads are not
			deleted.