Replace jammed originals if restarting job.
From the printer control panel, try one or more of the follo wing:
Select Cancel job to clear the message and cancel the scan job. For nontouchscreen printer models, press
to confirm.
Select Scan from automatic feeder to continue scanning from the ADF immediately after the last successful scan
job. For nontouchscreen printer models, press to confirm.
Select Scan from flatbed to continue scanning from the scanner immediately after the last successful scan job. For
nontouchscreen printer models, press to confirm.
Select Finish job without further scanning to end the last successful scan job. For nontouchscreen printer models,
press to confirm.
Select Restart job to restart the scan job with the same settings from the previous scan job. For nontouchscreen
printer models, press to confirm.
Replace maintenance kit, 0 estimated pages remain [80.xy]
The printer is scheduled for maintenance. For more info rmation, visit the Lexmark support Web site at
http://support.lexmark.com or contact your service representative, and then report the message.
Replace unsupported cartridge [32.xy]
Remove the toner cartridge, and then install a supported one to clear the message and continue printing. For more
information, see the instruction sheet that came with the supply o r see the “Replacing supplies” section of the User’s
Guide.
Note: If you do not have a replacement cartridge, then see the “Ordering supplies” section of the User’s Guide or
visit www.lexmark.com.
Replace unsupported imaging unit [32.xy]
Remove the imaging unit, and then install a supported one to cl ear the message and continue printing. For more
information, see the instruction sheet that came with the supply o r see the “Replacing supplies” section of the User’s
Guide.
Note: If you do not have a replacement imaging unit, then see the “Orderi ng supplies” section of the User’s Guide or
visit www.lexmark.com.
Scanner automatic feeder cover open
Close the ADF cover.
Scanner disabled by admin [840.01]
Print without the scanner, or contact your system sup port person.
Troubleshooting 195