Lexmark 270, 35S5700 manual Solving fax problems, Fax function is not set up, Troubleshooting 230

Troubleshooting			230
	Action	Yes	No
	Step 2	Go to step 3.	Change the paper size
	Check if the paper size setting matches the size of the paper loaded in the		setting to match the
	tray.		paper loaded in the
	From the Paper menu on the printer control panel, check the Paper		tray, or load the tray
			with paper that
	Size setting.
			matches the paper size
	Does the paper size setting match the size of the paper loaded in the tray.		setting.
	Step 3	The problem is solved.	Contact customer
	a Specify the paper size. Depending on your operating system, specify		support.
	the paper size in Printing Preferences or the Print dialog.
	b Resend the print job.
	Do copies print properly?

Solving fax problems

•“Fax function is not set up” on page 230

•“Caller ID is not shown” on page 231

•“Cannot send or receive a fax” on page 232

•“Can send but not receive faxes” on page 234

•“Can receive but not send faxes” on page 235

•“Received fax has poor print quality” on page 236

Fax function is not set up

Before completing these instructions for network printers, check if the fax cables are connected.

Note: The indicator light blinks red until you set up fax.