Smeg ST143 User instructions, Description of the controls, Upper panel, Half Load Indicator Light

User instructions

3. Description of the controls

3.1Upper panel

All the dishwasher controls are grouped on the upper panel.

1	ON/OFF button
	Pressing this button energises the appliance.
2	SELECTED PROGRAM indicator lights
	Illumination of this light denotes the program selected and the occurrence of a fault
	(troubleshooting).
3	PROGRAM SELECTION button
	By pressing this button in sequence it is possible to select the desired program.
4	SALT WARNING LIGHT (certain models only)
	Illumination of this light signals that salt container is empty.
5	RINSE AID WARNING LIGHT (certain models only)
	Illumination of this light signals that rinse aid dispenser is empty.
6	HALF LOAD BUTTON (certain models only)
	Pressing this button selects the HALF-LOADfunction.
7	HALF LOAD INDICATOR LIGHT
	Illumination of the light indicates selection of the HALF-LOADfunction.

SETTING THE WASHING PROGRAM AND SWITCHING ON

To select the most suitable program for the dishes to be washed refer to the table below, which indicates the most appropriate program according to dish type and degree of soiling.

After using the table to identify the most appropriate washing program:

•press the ON/OFF button (1) and wait for the PROGRAM INDICATOR LIGHT (2) to illuminate;

•keep pressing the PROGRAM SELECTION button (3) until the indicator light corresponding to the desired program illuminates;

•close the door; the machine will automatically begin the washing program after the sounding of the acoustic device.

30