Cisco Systems 1300 Series manual Preface, Objectives, Audience, Organization

Preface

This section describes the objectives, audience, organization, and conventions of the Cisco Aironet 1300 Series Outdoor Access Point/Bridge Hardware Installation Guide.

Objectives

This publication explains the steps for initial setup and basic configuration of the Cisco Aironet 1300 Series Outdoor Access Point/Bridge supporting 2.4-GHz operation. This publication also provides troubleshooting information and detailed specifications.

Audience

This publication is for the person installing and configuring the Cisco Aironet 1300 Series Outdoor Access Point/Bridge (called the access point/bridge) for the first time. The installer should be familiar with network structures, terms, and concepts.

Organization

This guide contains the following sections:

Chapter 1, “Overview,” describes the major components, features, and specifications of the access point/bridge.

Chapter 2, “Installation Overview,” provides warnings, safety information, and information needed before you begin the installation of your access point/bridge system.

Chapter 3, “Mounting and Alignment Overview,” provides an overview of components and features used during access point/bridge mounting and antenna alignment operations.

Chapter 4, “Using the Web-Browser Interface,” describes how to use the web-browser interface to configure the access point/bridge.

Chapter 5, “Configuring the Access Point/Bridge for the First Time,” describes how to enter basic access point/bridge configuration settings.

Chapter 6, “Using the Command-Line Interface,” describes how to use the command-line interface (CLI) to configure the access point/bridge.

Chapter 7, “Troubleshooting,” provides solutions to potential problems encountered during setup.

Cisco Aironet 1300 Series Outdoor Access Point/Bridge Hardware Installation Guide

OL-5048-02 ix