Cisco Systems 1300 Series Ssid, Security Settings, Troubleshooting, Power Injector, Using the CLI

Contents

	Enabling and Disabling Editing Features						6-8
	Editing Commands Through Keystrokes						6-8
	Editing Command Lines That Wrap					6-9
	Searching and Filtering Output of show and more Commands							6-10
	Assigning an IP Address Using the CLI					6-11
	Finding the Access Point/Bridge IP Address Using the CLI 6-11
	Troubleshooting
C H A P T E R 7		7-1
	Checking the LEDs		7-2
	Normal Mode LED Indications				7-2
	Power Injector	7-5
	Checking Power	7-6
	Checking Basic Configuration Settings					7-6
	Default IP Address Behavior				7-6
	Default SSID and Radio Behavior					7-6
	Enabling the Radio Interface				7-7
	SSID 7-7
	Security Settings 7-8
	Antenna Alignment		7-8
	Running the Carrier Busy Test			7-8
	Running the Ping or Link Test			7-9
	Resetting the Access Point/Bridge to the Default Configuration							7-10
	Using the Web-Browser Interface					7-10
	Using the CLI		7-10

			Reloading the Access Point/Bridge Image			7-11
			Web-Browser Interface	7-11
			Browser HTTP Interface		7-11
			Browser TFTP Interface		7-12
			Obtaining the Access Point/Bridge Image File				7-13
			Obtaining the TFTP Server Software			7-13
			Translated Safety Warnings
A P P E N D I X A				A-1
			Statement 84—Warning Definition		A-2
			Statement 245B—Explosive Device Proximity Warning A-3
			Statement 346—RF Exposure Limits A-4
			Statement 1001—Work During Lightning Activity				A-5
			Statement 1005—Circuit Breaker		A-6
		Cisco Aironet 1300 Series Outdoor Access Point/Bridge Hardware Installation Guide
	vi						OL-5048-02