Cisco Systems 1300 Series manual Site Surveys, Unpacking the Access Point/Bridge, Package Contents

Chapter 2 Installation Overview

Site Surveys

Site Surveys

Every network application is a unique installation. Before installing multiple access point/bridges, you should perform a site survey to determine the optimum use of networking components and to maximize range, coverage, and network performance.

Consider the following operating and environmental conditions when performing a site survey:

•Data rates—Sensitivity and range are inversely proportional to data bit rates. The maximum radio range is achieved at the lowest workable data rate. A decrease in receiver sensitivity occurs as the radio data increases.

•Antenna type and placement—Proper antenna configuration is a critical factor in maximizing radio range. As a general rule, range increases in proportion to antenna height. However, do not place the antenna higher than necessary because the extra height also increases potential interference from other unlicensed radio systems.

•Physical environment—Clear or open areas provide better radio range than closed or filled areas.

•Obstructions—Physical obstructions such as buildings, trees, or hills can hinder performance of wireless devices. Avoid locating the devices in a location where there is an obstruction between the sending and receiving antennas.

Unpacking the Access Point/Bridge

Follow these steps to unpack the access point/bridge:

Step 1 Open the shipping container and carefully remove the contents.

Step 2 Return all packing materials to the shipping container and save it.

Step 3 Ensure that all items listed in the “Package Contents” section are included in the shipment. If any item is damaged or missing, notify your authorized Cisco sales representative.

Package Contents

Each access point/bridge package contains these items:

•Access point/bridge unit (integrated antenna or external antenna configuration)

•Power injector (LR2) unit (with mounting screws and wall anchors)

•Power module and AC power cord

•Quick Start Guide: Cisco Aironet 1300 Series Outdoor Access Point/Bridge

•Cisco Aironet 1300 Series Outdoor Access Point/Bridge Mounting Instructions

•Cisco product registration and Cisco documentation feedback cards

Cisco Aironet 1300 Series Outdoor Access Point/Bridge Hardware Installation Guide

2-6 OL-5048-02