Cisco Systems 1300 Series Point-to-Multipoint Bridge Configuration, Access Point Configuration

Chapter 1 Overview

Network Configuration Examples

Point-to-Multipoint Bridge Configuration

The point-to-multipoint bridge configuration (Figure 1-6) connects the main LAN network to multiple remote LAN networks. Wireless devices can also connect to the root bridge.

Figure 1-6 Point-to-Multipoint Bridge Configuration

117021

Access Point Configuration

When configured in access point mode, the unit can support remote workgroup bridges and local wireless client devices (see Figure 1-7). The access point/bridge defaults to a root access point role.

Figure 1-7 Access Point Configuration

Access	Workgroup
point
	bridge

117075

The access point configuration allows the wireless devices and the Ethernet-enabled wired devices using the workgroup bridge to pass Ethernet traffic to and from the main LAN.

Cisco Aironet 1300 Series Outdoor Access Point/Bridge Hardware Installation Guide

1-8 OL-5048-02