DOCUPRINT NPS ON A NOVELL NETWORK
•
•
•
•
•
•
After installation, change from PSERVER to RPRINTER as follows:
—Sign on to privilege as an administrator.
—Type Configure to specify the printer configuration.
—Select Option 3, enter <N> to the Review All Information question, and type Novell to review Novell information.
—Remote Printer for Novell Netware
—Use Print Server for Novell Netware
—Name of Novell Print Server
—IPX Internal Network Number [000000##] (assigned by network administrator).
—IPX number of Connected LAN [000000##] (assigned by network administrator).
—Token Ring Framing type
TOKENRING_SNAP).
—Save all of the options.
Type Create Virtual Printer Gazette (must be the same name as the PSERVER printer name).
Type Start All.
Reboot the NPS.
Perform the following tasks from the Novell server console:
—Type Load PSERVER PGazette.
—Make sure the PSERVER window displays and Gazette activates and is waiting for jobs.
Provide all of the required installation parameters identified in the checklist provided in Chapter 2 of this guide to your service representative.
In the following illustration, the queue, remote printer, and virtual printer are configured with the same name, and the specified printer is set to print duplex. The user sends a print job through the LPT1 port to a queue named DPDuplex that is sent to the DPDuplex, and assigned to DPDuplex virtual printer.
Figure D-2. DocuPrint NPS configured as an RPRINTER
Client |
| Netware | Netware File Server | DocuPrint | ||||||
Workstation |
| File Server | RPRINTER configuration | |||||||
|
|
|
|
|
|
|
|
|
| |
Device |
|
|
| Queue |
|
| Remote |
| Virtual | |
|
|
|
|
| Printer |
|
| Printer | ||
|
|
|
|
|
|
|
| |||
|
|
|
|
|
|
|
|
| ||
LPT1 |
| Gazette |
|
| Gazette | Gazette | ||||
XEROX DOCUPRINT NETWORK PRINTER SERIES INSTALLATION PLANNING GUIDE FOR MODELS 96/4635/180 NPS |
