PRINTER SPECIFICATIONS AND REQUIREMENTS
Space planning guidelines
When determining your space requirements and planning for shared space between your printers, it is important to consider all of the components you plan to install.
To ensure all of the space requirements are met, it is important to work with your Xerox representative.
Before installation, you must consider the following:
•Clearance space requirements where you intend to install the printer
•Recommended cable lengths and locations (refer to the “System connections” chapter of this guide for more information)
•
•
Delivery access requirements
Floor leveling.
Clearance space requirements
The printer must be installed in a fixed location that provides the following clearance space:
•
•
•
36 inches / 91.4 cm on all sides of each component
24 inches / 61 cm of exclusive operator area in front of each component
78 inches / 198 cm of vertical clearance throughout the entire area.
Note: There must be a total of 50 inches / 126.9 cm of clearance space in front of the printer.
Shared space
It is best to provide the full amount of clearance space around the hardware components. Your environment may require you to use shared space between components, such as between the printer and the printer controller or between the printer and another Xerox printing system. You can share the
•
•
Space may be shared only with other Xerox equipment.
Components may share the
•There must be 78 inches / 198 cm of vertical clearance throughout the entire area.
Note: Finishers attached to your bypass transport and feeders attached to your DocuPrint 4635, 96, or 180 printer through the input enablement device may occupy shared space with Xerox equipment. However, they must be removable to allow servicing of the DocuPrint
XEROX DOCUPRINT NETWORK PRINTER SERIES INSTALLATION PLANNING GUIDE FOR MODELS 96/4635/180 NPS |
