
CONTROLLER SPECIFICATIONS AND REQUIREMENTS
Sun Ultra 60 workstation placement
Following are guidelines for placement of the Sun Ultra 60 workstation components of the printer controller.
Figure 5-4. Sun Ultra 60 printer controller hardware
1Mouse and mouse pad
2Keyboard
3Monitor
4Processor
5Table
To ensure consistent performance and avoid any damage to equipment, follow these rules for placing the components of the Sun Ultra 60 controller.
Do:
•Place the monitor and processor on a desk or table top, separate from the printer. The monitor should be placed beside the processor, on the same surface. (The cartridge tape drive may be placed on top of the processor.)
•Keep the processor in an upright, vertical position as illustrated below.
•Allow at least 6 inches / 152 mm of unobstructed space at the front and rear of the processor, so the fan and vents are not blocked.
XEROX DOCUPRINT NETWORK PRINTER SERIES INSTALLATION PLANNING GUIDE FOR MODELS 96/4635/180 NPS |