PREPARING FOR INSTALLATION
Default router Series of four integers between 0 and 255 separated by a period, such as 188.9.234.1, to specify a default router. Most TCP/IP networks broadcast routing information.
Caution: Specify a default router only if your network does not specify broadcast routing information. 
•
•
If the TCP/IP network does not broadcast routing information, specify an IP address of an existing router that is on the same subnet as the DocuPrint
If you are not on a TCP/IP network, specify the default of NONE.
Superuser password Select a password to prevent unauthorized access to the superuser
(UNIX root password) account. You can select a series of any ASCII characters, except those that your UNIX system interprets in a special way. Passwords have no limits on the number of characters, but the system uses only the first eight characters to administer password security. The password selection you make is case sensitive to the system.
Caution: Select a password that cannot be easily obtained by others to avoid unauthorized access to the system. This is not the same password used for Operator or Administrator functions. 
AppleTalk network information If the DocuPrint NPS is installed in an AppleTalk network environment, indicate whether your AppleTalk network is phase 1 or
2.Also, indicate the AppleTalk zone name you want the DocuPrint to locate. The zone name must be the same name as the existing zone used on the network to which the DocuPrint is attached. In addition, you must specify the network device on which AppleTalk runs.
Note: Do not use the ampersand “&” in the zone name to avoid conflict with UNIX expressions. If the ampersand character must be used, enter “\\&” instead.
Accounting information Indicate whether to set an interval on the system to automatically purge accounting information. If accounting information is not purged manually or automatically, the system disk can reach storage limits. To keep your system running at optimum speed, you need to periodically purge accounting data.
Xerox client software Indicate whether you have Xerox client software installed, and are
supporting Xerox clients on the network.
lpr Indicate whether to enable client use of lpr job submission and status commands.
UNIX command tool Indicate whether to have a UNIX command tool available for use in the background menu.
XEROX DOCUPRINT NETWORK PRINTER SERIES INSTALLATION PLANNING GUIDE FOR MODELS 96/4635/180 NPS |
