SUPPLIES
Paper care
Once you have purchased your paper, you must be sure it is stored and conditioned properly, so that it performs optimally in the printer with a minimum of jams.
Storing paper Paper has a tendency to curl under the heat that is present inside xerographic equipment. To minimize the amount of curling, use paper with low moisture content. Paper with excessive moisture content has a tendency to jam because of the greater curl. The maximum recommended moisture content is 5.7 percent.
Keep these points in mind when preparing your paper storage area:
•
•
•
•
•
Store paper in its own wrapper; do not leave it unwrapped or where it can be damaged by dampness or heat.
Store paper on a flat surface and not on its side or edge.
Store reams of paper in a closed cabinet.
Always store paper in a cool, dry area. Store on pallets or shelves, not on the floor.
Plan ahead and keep at least a day’s supply of paper in the same area as the printer to allow environmental stabilization prior to printing.
For more detailed information on paper for Xerox printers, refer to Helpful Facts about Paper, provided with your printer.
Figure A-9. Storing paper correctly
XEROX DOCUPRINT NETWORK PRINTER SERIES INSTALLATION PLANNING GUIDE FOR MODELS 96/4635/180 NPS |
