Xerox 180 NPS manual Printer Specifications and Requirements

PRINTER SPECIFICATIONS AND REQUIREMENTS

Service access The following figure provides space planning information and service access requirements for the bypass transport from a top view.

Figure 6-8.Bypass transport space planning diagram

1Recommended third-party feeder hardware attaches at rear of 96/4635/180 printer.

2Expected third-party input paper feed path

3Neutral area, to remain unoccupied

4Shaded areas at rear and right side of the bypass transport require third-party input/output devices to be undockable from the feeder/stacker or the bypass transport.

5Register edge of the output sheet

6Third-party hardware must not extend more than 1 inch / 25 mm beyond bypass transport front cover line for correct front door access.

7Bypass transport / input enablement jam clearance space is required.

6-14 XEROX DOCUPRINT NETWORK PRINTER SERIES INSTALLATION PLANNING GUIDE FOR MODELS 96/4635/180 NPS