PRODUCT OVERVIEW
DocuPrint Network Printing System The entire DocuPrint Network Printing System includes the printer, (NPS) printer controller, printer interface, and all appropriate software.
“DocuPrint printer” or “printer” refers to the base printer engine (IOT) only, without the printer controller and interface.
Note: It is your responsibility to supply, install, and maintain hardware and software on any PC, DECStation, Sun Workstation, HP/Apollo Workstation, IBM RS/6000 Workstation, or Macintosh system used to generate documents for printing on the DocuPrint printers. You are also responsible for obtaining, installing, and maintaining the required Ethernet LAN or Token Ring network, transceivers, and connecting cables.
The DocuPrint 96/4635/180 NPS and 96/4635/180 MICR NPS consist of a printer controller and a printer. They accept print input created by client software in PostScript Levels 1 and 2, VIPP (Variable Data Intelligent PostScript Print Ware), HP PCL 5c, HP PCL5e, or ASCII. This print input is passed to the printer controller through an Ethernet, Token Ring, or FDDI connection. The printer controller accepts the print job from the client workstation, converts the files into page images, and sends the page images to the printer.
The DocuPrint 4635 NPS and 4635 MICR NPS print data at a rate of up to 135 pages per minute, or up to 154 pages per minute with the smaller, 7 by 10 inch (178 by 254 mm) paper used with the optional 7 by 10 inch enablement feature.
The DocuPrint 96 NPS and 96 MICR NPS print data at a rate of up to 96 pages per minute in all four orientations (portrait, inverse portrait, landscape, and inverse landscape). 7 by 10 inch (178 by 254 mm) paper may be used with the optional 7 by 10 inch enablement feature.
The DocuPrint 180 NPS and 180 MICR NPS print data at a rate of up to 180 pages per minute, or up to 206 pages per minute with the smaller, 7 by 10 inch (178 by 254 mm) paper used with the optional 7 by 10 inch enablement feature.
Xerox is responsible for the physical installation and service of the printer and printer controller hardware and software components. You have the general responsibility for the site of ensuring that the correct personnel, supplies, and network hardware and software are available. Refer to the “Preparing for installation” chapter of this guide for a detailed description of the shared responsibilities of the customer and of Xerox.
XEROX DOCUPRINT NETWORK PRINTER SERIES INSTALLATION PLANNING GUIDE FOR MODELS 96/4635/180 NPS |
