PRINTER SPECIFICATIONS AND REQUIREMENTS
Turning radius for printer with separated components
The 96, 4635 or 180 is delivered with the printer, inverter feeder/ stacker, and each feeder/stacker as separate modules. If necessary, the printer can be separated into two pieces for ease in moving. The larger of the two parts contains the xerographic system; the smaller of the parts (the paper handling module, or PHM) contains paper trays 1 and 2. Do not confuse these two parts of the printer with the inverter and feeder/stacker modules, which have their own turning requirements.
The following table lists the turning requirements for the printer without the PHM (separated).
Table
Passage or doorway A width | Minimum passage B width |
|
|
29 inches / 73.7 cm | 74.5 inches / 189.2 cm |
|
|
30 inches / 76.2 cm | 64.5 inches / 163.8 cm |
|
|
31 inches / 78.7 cm | 62 inches / 157.5 cm |
|
|
32 inches / 81.3 cm | 59.5 inches / 151.1 cm |
|
|
34 inches / 86.4 cm | 56 inches / 142.2 cm |
|
|
36 inches / 91.4 cm | 53 inches / 134.6 cm |
|
|
38 inches / 96.5 cm | 50 inches / 127 cm |
|
|
40 inches / 101.6 cm | 48 inches / 121.9 cm |
|
|
42 inches / 106.7 cm | 45.5 inches / 115.6 cm |
|
|
The following table lists the turning requirements for the printer if it is upended for easier moving or
Table
Passage or doorway A width | Minimum passage B width |
|
|
30 inches / 76.2 cm | 49 inches / 124.5 cm |
|
|
31 inches / 78.7 cm | 43 inches / 109.2 cm |
|
|
32 inches / 81.3 cm | 41 inches / 104.1 cm |
|
|
34 inches / 86.4 cm | 37.5 inches / 95.3 cm |
|
|
36 inches / 91.4 cm | 35 inches / 88.9 cm |
|
|
38 inches / 96.5 cm | 33.5 inches / 85.1 cm |
|
|
40 inches / 101.6 cm | 32 inches / 81.3 cm |
|
|
42 inches / 106.7 cm | 31 inches / 78.7 cm |
|
|
XEROX DOCUPRINT NETWORK PRINTER SERIES INSTALLATION PLANNING GUIDE FOR MODELS 96/4635/180 NPS |
