
PREPARING FOR INSTALLATION
Retry count Determine whether the DocuPrint NPS system supports a print production environment, or whether the system remains unattended. Once you determine the environment the DocuPrint NPS supports, you must decide the number of attempts the system makes to print a job before a sequencer restart causes the job to be held for intervention.
•If the DocuPrint NPS supports a print production environment, you may want to specify a large number or zero as the number of attempts the system makes to retry a print job. (Zero indicates an infinite number of retries.)
•If the DocuPrint NPS is unattended, you may want to specify only 1 or 2 retries to print a job.
Novell network information
The Novell network information you provide to your service representative is based on whether you configure the DocuPrint as a print server or a remote printer. Refer to the “DocuPrint NPS on a Novell network” appendix of this guide and your Novell network administrator for assistance, if necessary.
DocuPrint as a print server (PSERVER)
Provide the following information to the service representative if you configure DocuPrint NPS as a print server on the Novell network (for further information, refer to the “Installation” chapter of this guide):
•
•
•
•
•
Novell file server
Print server
Password for the print
Queue name to
The single printer that must be defined for the print server (as stated above) must also be defined to service the specified queue.
Form
XEROX DOCUPRINT NETWORK PRINTER SERIES INSTALLATION PLANNING GUIDE FOR MODELS 96/4635/180 NPS |