CONTROLLER SPECIFICATIONS AND REQUIREMENTS

Printer controller hardware specifications and requirements summary

The following table summarizes the specifications and electrical requirements of your DocuPrint NPS printer controller hardware components.

For a summary of printer hardware specifications and requirements, refer to the “Printer specifications and requirements” chapter of this guide. Contact your service representative if you have questions not specifically addressed in this guide.

Table 5-3.96/4635/180 NPS printer controller specifications and

 

 

 

power requirements

 

 

 

 

 

 

 

 

Dimensions (width,

 

Heat

 

 

Device

height, depth)

Weight

dissipation

Power requirements

Cable lengths

 

 

 

 

 

 

Processor

W=16.4 in. (42 cm)

27 lbs.

1,100 BTU

Sun Ultra 2 (60 Hz):

Power: 8 ft.

 

H=3 in. (8 cm)

(12.7 kg)

per hour

100 to 240 VAC,

(2.1 m)

 

D=16.1 in. (41 cm)

 

 

15 amp, 0.4 KVA,

Interface to printer:

 

 

 

 

5-15R NEMA

 

 

 

 

20 ft. (6.1 m)

 

 

 

 

 

 

 

 

 

 

total length

 

 

 

 

Sun Ultra 2 (50 Hz):

 

 

 

 

 

100 to 240 VAC,

 

 

 

 

 

15 amp, 0.4 KVA

 

 

 

 

 

Sun Ultra 60 (60 Hz):

 

 

 

 

 

100 to 240 VAC,

 

 

 

 

 

15 amp, 0.4 KVA,

 

 

 

 

 

5-15R NEMA

 

 

 

 

 

Sun Ultra 60 (50 Hz):

 

 

 

 

 

100 to 240 VAC,

 

 

 

 

 

15 amp, 0.4 KVA

 

 

 

 

 

 

 

Monitor

W=18.1 in. (46 cm)

61 lbs.

408 BTU per

100-120 VAC,

Power: 8 ft.

 

H=17.7 in. (45 cm)

(27.7 kg)

hour

1 phase, 50-60 Hz,

(2.1 m)

 

D=16.1 in. (41 cm)

 

 

3.0 amp, 0.4 KVA

Video cable to

 

 

 

 

200-240 VAC,

 

 

 

 

processor:

 

 

 

 

1 phase, 50-60 Hz,

46 in. (1.17 m)

 

 

 

 

2.0 amp, 0.4, KVA

 

 

 

 

 

 

 

Quarter-inch

W=9.6 in. (24 cm)

7 lbs.

---

100-120/200-240

SCSI cable to

cartridge tape

H=2.8 in. (7 cm)

(3.18 kg)

 

VAC, 0.8/0.4 amp,

processor or

drive, 150 MB

D=10.4 in. (26 cm)

 

 

47-63 Hz

additional SCSI

(optional)

 

 

 

 

device: 28 in. (71

 

 

 

 

 

cm)

 

 

 

 

 

 

4 mm

W=7.5 in. (19 cm)

8 lbs.

---

100-120/200-240

SCSI cable to

cartridge tape

H=2.8 in. (7 cm)

(6.6 kg)

 

VAC, 0.8/0.4 amp,

processor or

drive

D=12.2 in. (31 cm)

 

 

47-63 Hz

additional SCSI

(optional)

 

 

 

 

device: 28 in. (71

 

 

 

 

 

cm)

 

 

 

 

 

 

Keyboard

W=18 in. (45.7 cm)

2 lbs.

---

---

72 in. (1.8 m)

 

D=7.5 in. (17.8 cm)

(1 kg)

 

 

 

 

 

 

 

 

 

5-8

XEROX DOCUPRINT NETWORK PRINTER SERIES INSTALLATION PLANNING GUIDE FOR MODELS 96/4635/180 NPS

Page 58
Image 58
Xerox 180 NPS manual Sun Ultra 2 60 Hz, Sun Ultra 2 50 Hz, Sun Ultra 60 60 Hz, Sun Ultra 60 50 Hz