
7.System connections
This chapter provides cable requirements for your 96/4635/180 NPS system. To ensure all of your cable requirements are met, it is important to work with your Xerox representative.
Cable lengths
Cable lengths are important considerations in planning your layout, as components can be separated only up to the length of the data interface cables that connect them.
Cables supplied with the printer are of sufficient length to meet the needs of most installations. Some of these cables are specific lengths to conform to engineering and safety standards.
Data cables The printer components can be separated up to the length of the data interface cables that connect them. The printer and controller are connected by a
Power cables The 96/4635/180 power cable lengths are as follows:
Table 7-1. Power cable lengths
Power cable | Length |
|
|
Printer controller | 8 feet / 2.1 m |
|
|
Printer | 15 feet / 4.4 m |
|
|
Warning: Using an inappropriate alternate cable may degrade the
!performance of your equipment and may also be hazardous.
Note: Cable length loss must be factored in if equipment is installed in a
XEROX DOCUPRINT NETWORK PRINTER SERIES INSTALLATION PLANNING GUIDE FOR MODELS 96/4635/180 NPS |