Xerox 180 NPS manual Controller Components and Options

CONTROLLER COMPONENTS AND OPTIONS

Figure 2-3.Components of the Sun Ultra 60 workstation

1Monitor

2Keyboard

3Mouse

4Processor

5Diskette drive

6CD-ROM drive

7Cartridge tape drive

Processor The 256 MB RAM processor is the central processing unit of the Sun Ultra 60 workstation. It contains a power switch, a disk drive, a diskette drive, a CD-ROM drive, a power receptacle and outlet, connectors and ports.

The processor has the following components:

•Internal disk drive: Two 18.2 GB primary disk drives are provided as a standard feature of the processor. The operating system, the NPS application, and any queued print jobs are stored on the internal disk. This disk cannot be used to store other applications or data except as directed by your service representative.

•

•

Diskette drive: Diskettes inserted into a diskette drive are used to load files to, and back up files from, the internal disk drive. The diskette drive uses industry standard 3.5 inch, 1.44 MB, double-sided, high-density diskettes. This diskette drive is not an input source for print jobs nor any other data or application; it is reserved exclusively for use by a service representative to update software and to store files.

CD-ROM drive: The CD-ROM drive is a high density, read-only, optical laser storage device used for loading the NPS operating system and other files. The CD-ROM drive is located in the processor above the diskette drive.

XEROX DOCUPRINT NETWORK PRINTER SERIES INSTALLATION PLANNING GUIDE FOR MODELS 96/4635/180 NPS 2-5