INSTALLATION
7.Xerox personnel review preventive maintenance schedules and service call procedures.
Your responsibilities
Xerox is responsible for the physical installation of the printer components and for loading the software and applications. You have the general site responsibility of ensuring that the right personnel, supplies, and network information are available.
At the time of installation, you should do the following:
•
•
Make sure that your system administrator is available during the loading of software.
For software loading purposes, be prepared to provide Xerox personnel with network information from the preinstallation checklist. Refer to the “Preparing for installation” chapter of this guide for specifics regarding network information.
•Designate two client workstations for downloading Xerox Client Software if applicable: one for initial system validation and another for use in operator training provided by your systems analyst.
•Check the documentation and software kits with their packing lists for completeness.
•
•
•
Load Xerox client software on any additional client workstations.
Remember that you are responsible for supplying, installing, and maintaining your client workstations and the Token Ring network or Ethernet local area network (LAN) that connects them with the printer controller.
Have test jobs ready to run.
Have your operators available for training.
Refer to the installation planning checklist in the “Preparing for installation” chapter of this guide for a complete list of responsibilities.
XEROX DOCUPRINT NETWORK PRINTER SERIES INSTALLATION PLANNING GUIDE FOR MODELS 96/4635/180 NPS |
