Xerox 180 NPS manual Back panel of the Sun Ultra 2 processor

CONTROLLER COMPONENTS AND OPTIONS

•

•

•

CD-ROM drive: The CD-ROM drive is a high density, read-only, optical laser storage device used for loading the NPS operating system and other files. The CD-ROM drive is located in the processor above the diskette drive.

Cartridge tape drive (not shown): An optional 8 GB, 4 mm SCSI cartridge tape drive also is available for the NPS. Like the diskette and CD drives, this tape drive is not an input source for print jobs or for any other data or application. It provides the service representative with another means of loading system maintenance files or saving diagnostic information.

Back panel: The back panel of the processor has a power switch, a power receptacle and outlet, connectors, connector openings, and ports. The following figure shows the back panel of the Sun workstation that is a part of your NPS controller.

Figure 2-2.Back panel of the Sun Ultra 2 processor
1	2	3				4
				3			1
				2			0
12	11	10	9	8	7	6	5

1Power inlet

2Serial connectors (2): RS-432/RS-232

3Graphics/video output: UPA slot

4Sbus slots (Number of slots varies depending on the model)

5Audio connectors (4)

6Parallel connector

7Keyboard/mouse connector

8TPE connector

9MII connector

10UPA slot

11SCSI connector

12Power on/Standby switch

Display monitor The display monitor has a 1192 x 700 pixel screen which displays the NPS text user interface windows.

The text user interface allows you to interact with the printer and to monitor its interaction with the various components. During a print job, printer error messages may display to notify you of any unexpected conditions.

XEROX DOCUPRINT NETWORK PRINTER SERIES INSTALLATION PLANNING GUIDE FOR MODELS 96/4635/180 NPS 2-3