4. Preparing for installation
This chapter assists you in preparing for the installation of your Xerox DocuPrint 96/4635/180 NPS and 96/4635/180 MICR NPS.
Preparing for installation is a responsibility shared by personnel at your site and Xerox. Your service representatives are available to discuss installation issues and to assist you in completing the site installation tasks.
Prior to installation, you must select and prepare an appropriate location for the printer and order supplies. This chapter helps you accomplish these tasks by providing the following information:
•
•
A summary of your responsibilities and those of your Xerox service representative
A checklist of installation planning activities.
For information on controller power and space requirements, refer to the “Controller specifications and requirements” chapter of this guide. For facts about printer power and space requirements, refer to the “Printer specifications and requirements” chapter of this guide.
Responsibilities
This section describes your site responsibilities and the responsibilities of your service representatives. Included are some joint responsibilities.
Xerox responsibilities
This section lists the responsibilities of the service representatives and system analysts prior to, during, and after installation:
•
•
Site selection
—Assist in site selection
—Inspect and approve the site.
Installation
—Schedule the delivery of the hardware
—Monitor installation activities
—Assist you in ordering any supplies required
—Install the DocuPrint system
—Install optional Sixth Sense hardware and software.
XEROX DOCUPRINT NETWORK PRINTER SERIES INSTALLATION PLANNING GUIDE FOR MODELS 96/4635/180 NPS |
