INSTALLATION
WIRING DIAGRAMS
This heater does not require a 120VA.C. supply for operation. In case of a power failure, the burner switch and the optional remote control/thermostat will continue to operate. However, a 120V A.C. power supply is needed for the fan/blower operation.
(Do not cut the ground terminal off under any circumstances.)
NOTE: Even if the fan is not purchased with the unit, it is still a good idea to bring power to the receptacle box (provided with the unit) in case the fan is installed at a later date.
For NATURAL GAS Units and Units NOT Equipped with DC Spark Boxes
38 | Regency® |