INSTALLATION
VERTICAL TERMINATION
WITH
THE APPLIANCE MUST NOT BE CONNECTED TO A CHIMNEY FLUE SERVING A SEPARATE SOLID FUEL BURNING APPLIANCE.
Masonry chimneys may take various contours which the flexible liner will accommodate. However, keep the flexible liner as straight as possible, avoid unnecessary bending.
The Air Intake pipe must be attached to the inlet air collar of the termination cap.
This appliance is designed to be attached to two 3" (76mm)
Required Parts:
Part # | Description |
| Termination Cap |
3" Flex - 35 ft. | |
| which contains the following: |
| |
| Outer Pipe |
| Inner Pipe Adapter |
Rigid Pipe Adaptor | |
945 | 45o Elbow |
Co-linear DV
Vertical Termination
Cap #
Amaximum of two certified
joiner kits
may be used per length. #948-305 35 ft (11m)
Flex Liner
Alternate Approved Caps
980Vertical Termination Cap
991High Wind Cap
923GK 3"
FPICabinetand/orFlatWallMantlesmay be used in these applications ensuring that clearances to combustibles are maintained.
Exhaust
Flue
Outer
Pipe
with Kit#
Pipe Length
Rigid Pipe Adapter
#
Air Intake
Flex
Adapter
with Kit# 946-563
45o Elbow
Inner Pipe
Adapter with Kit#
Regency® | 23 |