Regency P33-LP4 Installation, Hinge Location Bottom Grill, Left Side of Bottom Grill Screen Door

INSTALLATION

NOTE: Should the fi nished wall protrude beyond the face of the unit, you can accommodate up to 1/2" depth.

Simply push in the Full Screen Door Frame until it aligns against the fi nished wall. Secure Top Flange of Full Screen Door Frame as described in step 4 b).

For the Bottom Flange of the Full Screen Door Frame, push the bottom of the Frame until it aligns with the wall. Use the inner cut-outs to secure the base of the Frame using the 2 x #8 Self Tapping Phillips screws provided.

5)Install the Hinges to the Hinge Brackets on the left and right side of the Bottom Faceplate Bracket (seen in step 2), secure using 2 x #8 Self Tapping Philips screws per hinge.

8)Re-install Glass Door. Refer to the manual for instructions.

9)Slide the Top Grill into the louver brackets located on the inside top of the fi rebox. Push in place.

Top Grill

6)Place the Bottom Frame near the hinges, and fl ip down the hinges from the Bottom Face Plate. Secure the hinges in place to the Bottom Frame, using 2x #8 Self Tapping Phillips screws per hinge.

Hinge Location

Bottom Grill

10)Install the Left and Right Side Screen Doors in the fully open position by placing over top of the hinges on the Full Screen Door Frame.

NOTE: Failure to install the doors in the fully open position could result in paint damage to the surface of the door.

Hinge

7)Mount the Burner ON/OFF Control Box to the left side of the Bottom Grill using 2 x #8 - 1/4" Philips Head Screws.

Left Side

of Bottom

Grill

Screen Door

Burner ON/OFF

Control Box

11) Close screen doors.

36 Regency® P33-4 Zero Clearance Direct Vent Gas Fireplace