VLAN | The VLAN which has the IP interface to the default router. |
| You cannot enter any value in this field. The switch will fill in the |
| corresponding VLAN only after you specify the Next Hop Address |
| and select Enter. |
|
|
Next Hop Address The IP address of the default router.
Metric | The number of hops required to reach the default router. |
|
|
2.5.7.Configuring Security Filters
You can use the Security menu to filter MAC and IP addresses.
Security Menu
=============
|
| MAC Filtering Configuration ... |
|
| Security Mode ... |
|
|
|
|
| IP Filtering Configuration ... |
|
| <OK> |
|
| Config MAC filtering database. |
|
| Use <TAB> or arrow keys to move. <Enter> to select. |
|
|
|
|
|
|
| Parameter | Description |
| MAC Filtering | Specifies the source or destination MAC address for any traffic to be |
| Configuration | filtered from the switch. |
| Security Mode | Configuration the security mode. |
| IP Filtering | Specifies the source or destination IP address for any traffic to be |
| Configuration* | filtered from the switch. |
|
|
|
* This menu item is only displayed if the intelligent switch is set to multilayer mode.
2.5.7.1.Configuring MAC Address Filters
Any node that presents a security risk or is functioning improperly can be filtered from this switch. You can drop all the traffic from a host device based on a specified MAC address. Traffic with either a source or destination address listed in the Security Filtering Configuration table will be filtered.
71
