114
3.4.2.Displaying Switch Version Information
Use the Switch Information screen to display hardware / firmware version numbers for
the main board, as well as the power status and modules plugged into the system.
Parameter Description
Hardware Version Hardware version of the main board.
Firmware Version System firmware version in ROM.
Serial Number Serial number of the main board.
Port Number Number of ports on this switch.
Internal Power Status Power status for the switch.
Parameter Description
Expansion Slot 1 Shows module type if inserted:
1GBASE-SX/LX : 1000BASE-SX/LX (multimode/ single mode)
1GBASE-T : 1000BASE-T
After initially logging onto the system, you can use this menu to configure access rights.
You should set user names and passwords (User Configuration). Remember to record
them in a safe place. You should also set the community string which controls access to
the onboard SNMP agent via in-band management software (SNMP Configuration). The
items provided by the Management Setup Menu are described in the following sections.
Menu Description
Network
Configuration¹
Configures the switch’s IP parameters.
Serial Port
Configuration
Sets communication parameters for the serial port, including baud
rate, console timeout, and screen data refresh interval.
(See “Configuring the Serial Port” on chapter 3.)
SNMP
Configuration
Activates authentication failure traps, and configures communities
and trap managers.