LevelOne GSW-2600TXM manual Enabled 10HDX

Layer 2 Menu: Port Configuration (Port 1-12)

============

Port	Link	Admin	Auto	Default	Current	Flow
Jack	Status	Status	Negotiate Type		Type
Control
	Type

-----------------------------------------------------------------
----------			ENABLED		ENABLED		10HDX		10HDX		Off
1	Off
2	Off			RJ-45			10HDX		10HDX		Off
			ENABLED		ENABLED
RJ-45	Off		ENABLED		ENABLED		10HDX		10HDX		Off
3
RJ-45	Off		ENABLED		ENABLED		10HDX		10HDX		Off
4
RJ-45	Off		ENABLED		ENABLED		10HDX		10HDX		Off
5
RJ-45	Off		ENABLED		ENABLED		10HDX		10HDX		Off
6
RJ-45	Off		ENABLED		ENABLED		10HDX		10HDX		Off
7
RJ-45	Off		ENABLED		ENABLED		10HDX		10HDX		Off
8
RJ-45	On		ENABLED		ENABLED		10HDX		100TX-FDX		Off
9
RJ-45	Off		ENABLED		ENABLED		10HDX		10HDX		Off
10
RJ-45	Off		ENABLED		ENABLED		10HDX		10HDX		Off
11
RJ-45	On		ENABLED		DISABLED		100FDX		100FX-FDX		Off
12
FIBER		<Apply>			<OK>		<Cancel>		<Prev Page> <Next
Page>
			Administrative status for port 1.
READ/SELECT
		Use <TAB> or arrow keys to move, <Space> to scroll options.
Parameter			Default	Description
Link Status				Indicates if the port has a valid connection to an external
				device.
Admin Status			Enabled	Allows you to disable a port due to abnormal behavior (e.g.,
				excessive collisions), and then enable it after the problem has
				been resolved. You may also disable a port for security
				reasons.
Auto Negotiate			Enabled	Enables or disables auto-negotiation for the following features
			(except	Port Type		Speed		Duplex Mode		Flow Control
			100FX)	10/100BASE-T		auto		auto		auto
				100BASE-FX 100M-				full duplex		auto
				1000BASE-SX/ 1000M				full duplex		auto
				LX
				1000BASE-T		1000M		full duplex		auto
				The 10/100BASE-TX ports can auto negotiate the speed to
				10/100 Mbps, and the transmission mode to half / full duplex.
						32