Bridge | Contains global bridge settings for STA (including bridge priority, hello |
Configuration | time, forward delay, maximum message age), GMRP, GVRP, traffic |
| class priority threshold, and address aging time. |
STA Port | Contains STA settings for individual ports, including port priority, path |
Configuration | cost, and fast forwarding |
3.6.3.1.Configuring Global Bridge Settings
The following figure and table describe bridge configuration for STA, GMRP, GVRP, priority threshold, and address aging time.
Parameter | Default | Description |
Spanning | Enabled | Enable this parameter to participate in a STA compliant |
Tree |
| network. |
Bridge | 32,768 | Bridge priority is used in selecting the root device, root port, and |
Priority |
| designated port. The device with the highest priority becomes |
|
| the STA root device. However, if all devices have the same |
|
| priority, the device with the lowest MAC address will then |
|
| become the root device. |
|
| Enter a value from 0 - 65535. |
|
| Remember that the lower the numeric value, the higher the |
|
| priority. |
Hello Time | 2 | Time interval (in seconds) at which the root device transmits a |
|
| configuration message. |
|
| The minimum value is 1. |
|
| The maximum value is the lower of 10 or [(Max. Message Age / |
|
| 2) |
