console to ensure a reliable connection (Serial Port Configuration). Specify the IP addresses for the switch (Network Configuration / IP Configuration), and then set the Administrator and User passwords (User Configuration). Remember to record them in a safe place. Also set the community string which controls access to the onboard SNMP agent via
Management Setup Menu
=====================
Network Configuration ...
Serial Port Configuration ...
SNMP Configuration ...
User Configuration ...
TFTP Download ...
Configuration File
<OK>
Display or change network configuration.
Use <TAB> or arrow keys to move. <Enter> to select.
Menu | Description |
Network | Includes IP setup, Ping facility, and HTTP setup for the onboard |
Configuration | Web agent. |
Serial Port | Sets communication parameters for the serial port, including |
Configuration | baud rate, console timeout, and screen data refresh interval. |
SNMP Configuration | Activates authentication failure traps and configures communities |
| and trap managers. |
User Configuration | Sets the user names and passwords for system access. |
TFTP Download | Downloads new version of firmware to update your system |
| |
Configuration File | Saves or restores configuration data based on the specified file. |
2.4.1.Changing the Network Configuration
Use the Network Configuration menu to set the bootup option, configure the switch’s Internet Protocol (IP) parameters, or enable the onboard Web agent. The screen shown below is described in the following table.
18
