| the console, Telnet or HTTP. |
Password* | Password associated with this entry. |
Access Right | ADMIN: Read / Write for all screens. |
| GUEST: Read Only for all screens. |
Console Access | Authorizes management via the console. |
Telnet Access | Authorizes management via Telnet. |
HTTP Access | Authorizes management via HTTP (i.e., a Web browser). |
*These entries can consist of up to 15 alphanumeric characters and are not case sensitive.
2.4.5.Downloading System Software
Use the TFTP Download menu to load software updates to permanent flash ROM in the switch. The download file should be a correct binary file for the switch; otherwise the agent will not accept it. The success of the download operation depends on the accessibility of the TFTP server and the quality of the network connection. After downloading the new software, the agent will automatically restart itself. Parameters shown on this screen are indicated in the following figure and table.
TFTP Download
=============
Download Server | IP | : 0.0.0.0 | |
Download | Filename | : | |
Download | Option |
| : Runtime Code |
| <Apply> | <OK> | <Cancel> | |
READ/WRITE |
| IP address of the TFTP server. |
| |
|
|
|
| |
Use <TAB> or arrow keys to move, other keys to make changes. | ||||
|
|
|
|
|
|
|
|
|
|
Parameter |
| Description |
|
|
Download Server IP |
| IP address of a TFTP server. |
| |
Download Filename |
| The binary file to download. |
| |
Download Option |
| Runtime Code |
|
|
|
| Post Code |
|
|
Note: |
|
|
|
|
You can also download firmware using the Web agent (see ”Downloading system software” on chapter 3) or by a direct console connection after a restart (see “Upgrading Firmware via the Serial Port”on Appendix A).
27
