from a specified VLAN. If you select “Mgmt VLAN,” then select Apply to display the VLAN ID field, select the required VLAN, and then select Apply or OK to save your changes.

2.4.1.2.IP Connectivity Test (Ping)

Use the IP Connectivity Test to see if another site on the Internet can be reached. The screen shown below is described in the following table.

Network Configuration: IP Connectivity Test (Ping)

=====================

IP Address : 0.0.0.0

Test Times : 0

Success

: 0

Failure : 0

 

[Start]

<CANCEL>

 

IP address to test.

READ/WRITE

Use <TAB> or arrow keys to move, other keys to make changes.

 

 

 

 

 

 

Parameter

Description

 

IP Address

IP address of the site you want to ping.

Test Times

The number of ICMP echo requests to send to the specified site.

 

Range: 1~1000

 

Success / Failure

The number of times the specified site has responded (or not) to

 

pinging.

 

Note:

 

 

The switch waits up to 10 seconds for a response to each ping.

2.4.1.3.HTTP Configuration

Use the HTTP Configuration screen to enable / disable the onboard Web agent.

21

Page 21
Image 21
LevelOne GSW-2600TXM manual IP Connectivity Test Ping, Http Configuration